Stainless Steel 2 Piece Female Threaded Ball Valve

Stainless Steel Valves

Casting Stainless Steel With Full Port Body

Two Piece  Ball Valve(2Pc Ball Valve)

Stainless Steel 2 Piece Ball Valve Acting-Pneumatic

2PC Full Bore Female Thread ball valve introduction:
Two-piece internal thread ball valve and butt welding ball valve are suitable for PN1.0～4.0MPa, working temperature -29～180°C (sealing ring is reinforced PTFE) or -29～300°C (sealing ring is para-polybenzene) Used to cut or switch on the medium in the pipeline. Different materials can be used for water, steam, oil, nitric acid, acetic acid and other media.

Stainless Steel 2 Piece Ball Valve The internal thread connection ball valve and the butt welding connection ball valve are divided into a single type (one piece), two stages and three stages. The valve seat adopts elastic sealing structure, which is reliable in sealing and easy to open and close. The valve stem adopts a bottom-mounted structure with an inverted seal. When the valve cavity is abnormally boosted, the valve stem will not be flushed out. Two-piece, three-piece ball valve connection forms are also available for butt welding (BW) socket welding (SW), and can be equipped with international standard ISO bracket platform and locking device. It can be set with 90° switch positioning mechanism, and can be locked according to need to prevent misoperation. Drive mode: manual, electric and pneumatic.

2 Way 2PC Ball Valve Features:
 Stainless steel material offers no-rust solution for your project
 Available in stainless steel 304 or 316 material for your choice
 Available in G and NPT threaded to meet your pipeline standard
Easy to install and easy to open/close
Lockable is available
ISO5211 mounting for electric actuator and pneumatic actuator
Technical Parameters:
● Size Range: DN8-DN80 (1/4″, 3/8″, 1/2″, 3/4″, 1″, 1 1/4″, 1 1/2″, 2″, 2 1/2″, 3″,4")
● Material: Stainless Steel 304 or Stainless Steel 316
● General Pressure: PN1.6, 2.5, 4.0, 6.4 MPa (Higher pressure requirement, please contact us)
● Temperature: -10~180℃ (-10°F to 356°F)
● Suitable Medium: Water, Oil, Gas, etc
● Widely used in water treatment, shipyard, boiler, food and beverage, oil and gas industry and other applications

Features:
Valve bodies are made of 304 stainless steel for rust protection and long service life.
Ball valves are durable, performing well after many cycles, and reliable, closing securely even after long periods of disuse.
Ball valve's ease of operation, repair, and versatility lend it to extensive industrial use.
Handle lies flat in alignment with the flow when open and perpendicular when closed for easy visual confirmation of valve's status.
This high quality ball valves would be excellent choices for shutoff and control applications.

These products mainly used in the field of industrial, we also supply Stainless Steel Flange Ball Valve,Globe Valve,Gate Valve  strainer, fittings and so on.

Stainless Steel 2 Piece Ball Valve,Stainless STeel Full Port 2 Piece Ball Valve,Stainless Steel  304/316 2PC Ball Valve,Stainless Steel Two Piece Ball Valve,Stainless Steel  1000WOG Ball Valve,Stainless Steel Femle Threaded Ball Valve,Stainless Steel Full Born Ball Valve,